Toll Free + 1 (800) 245-7660

Products Signals Vehicle Traffic Signals
Vehicle Traffic Signals

Vehicle Traffic Signals

Unique design and technological advantages make Oriux Traffic Signals “Best in class"

 Request information

Details

Polycarbonate or aluminium… we’ve got the best for you

Request information Download Datasheet Download Datasheet

 

Our polycarbonate signals are unaffected by scratches, they have an impregnated color means that they never need painting and are impervious to corrosive atmospheres, among other benefits.


On the other hand, our aluminium signals are equipped with exterior stainless steel hardware, the doors and lens gaskets make the signal weather-proof and dust-tight and its ntegral visor rims prevent leakage.

 

Vehicle Traffic Signals
Features Features Benefits Benefits Warranty Warranty
Features

Features

Polycarbonate Signals

  • Material: Ultraviolet-stabilized polycarbonate resin (having a minimum thickness of 0.100 inches), Stainless steel exterior hardware. Couplers are standard steel-zinc, but a stainless steel option is available.
  • Reflector: Snap-out assembly. Swing out frame. Lane control uses a standard reflector.
  • Lamp receptacle: Heat-resistant molded phenolic, Rotatable through 360 . Pre-wired with 26 #18 AWG 105 C type TEW color-coded leads with Quick-disconnect terminals.
  • Wire opening between sections: Accommodates three 3/4 diameter cables
  • Terminal Block:
    • 1-Section 2-point
    • 2-Section 3-point
    • 3-Section 5-point
    • 4-Section 5-point
    • 5-Section 5-point and 5 point
  • Signal alignment: Integral 72-tooth serrated adjustable in 5 steps.
  • Weight: 8 (200mm) LED-Ready Section = 1.85 lb (0.84kg) - 12 (300mm) LED-Ready Section = 3.15 lb (1.43kg)
  • Overall dimension: 8 (200mm) Section = 9.75” W x 10” H x 6.16” D - 12 (300mm) Section = 13.5” W x 13.44” H x 6.44” D

Aluminium Signals

  • Material: Die-cast aluminum alloy housing and door. Stainless steel exterior hardware. Couplers are standard steel-zinc, but a stainless steel option is available.
  • Finish: Electrostatically applied powder coat with five stage iron phosphate treatment.
  • Reflector: Snap-out assembly. Swing out molded frame. Lane control uses a standard reflector
  • Lamp receptacle: Heat-resistant molded phenolic, Rotatable through 360 . Pre-wired with 26 #18 AWG 105 C type TEW color-coded leads with Quick-disconnect terminals.
  • Wire opening between sections: Accommodates three 3/4 diameter cables
  • Terminal block:
    • 1-section 2-point
    • 2-section 3-point
    • 3-section 5-point
    • 4-section 5-point, 2-point
    • 5-section 5-point 2, and 3-point
  • Signal alignment: Integral 72-tooth serrated adjustable in 5 steps.
  • Weight: 8 (200mm) LED-Ready Section = 4.2 lb (1.9 kg) - 12 (300mm) LED-Ready Section = 5.5 lb (2.5 kg)
  • Overall dimension: 8 (200mm) Section = 9.75 W x 10 H x 6.16 D -12 (300mm) Section = 13.5 W x 13.44 H x 6.44 D
Benefits

Benefits

 

  • Unaffected by scratches
  • Impregnated color means that they never need painting
  • Impervious to corrosive atmospheres
  • One-piece doors, grooved.
  • Simple alignment and positive locking in 5 degree steps
  • Ribbed for structural stability
  • Reinforced plates available
  • Adaptable to span wire or mast suspension
  • Universal vertical and horizontal ready mounting arrangement
  • Exterior hardware in stainless steel available
  • LED ready or equipped with reflectors
  • Weather proof and dust tight one piece doors plus gasket
  • Fifty percent lighter than aluminum

Aluminum Signals

  • Equipped with exterior stainless steel hardware
  • Doors and lens gaskets make the signal weather-proof and dust-tight
  • Integral visor rims prevent leakage
  • Available reflectors in Alzak ®
  • The lamp receptacle can be rotated 360 degrees for filament alignment
  • Integral locking rings included
  • Adaptable for span wire, mast arm suspension, side pole or post top mounting
Warranty

One Year Limited Warranty

Oriux warrants* these products against manufacturing defects in materials and workmanship for one year from date of shipment from the Oriux factory. Specific contracts and regional laws may vary or alter these terms. Oriux products are protected by one or more U.S. and international patents.

* For specific warranty information, contact your local Oriux product representative.

Poly and Aluminum signals are also available with LED ready.

Weights do not include hardware modifications. Door only, no visors.

You may also be interested in

Pedestrian Traffic Signals

Pedestrian Traffic Signals

Pedestrian signals are special types of traffic signal indications installed for the exclusive purpose of controlling pedestrian traffic.

See more See more
Backplates for Traffic Signals

Backplates for Traffic Signals

Oriux offers a variety of one-piece aluminum signal backplates as optional add-ons for all of its vehicle signals, including 12” signals with 1-5 sections, and 8” signals with up to 3 sections.

See more See more
NEMA Cabinet Power Supply

NEMA Cabinet Power Supply

The Oriux NEMA TS-2 Cabinet Power Supply is a shelf mounted unit that provides all regulated DC and AC voltages for all Bus Interface Units (BIU), load switches, and detectors for a TS-2 Type 1 cabinet assembly.

See more See more
ATC-2000---240

ATC-2000 Traffic Controller

The ATC-2000 is the rack-mounted version of Oriux's ATC controller. These controllers are designed to be modular and based on the widest range of traffic controller standards in the world.

See more See more

We can help you

Expert advice

For more information about our products and services, please contact us.

Contact Us
Close

NEED HELP?

Contact us or request a quote, tell us about your project to help you better.