Vehicle traffic signals
Unique design and technological advantages make Oriux Signals ‘Best in Class.’
Oriux Signals feature ultraviolet-stabilized polycarbonate resin with a minimum thickness of 0.100 inches, and stainless steel exterior hardware. Couplers are made of standard steel-zinc, with an optional stainless steel variant available.
Polycarbonate signals are:
Unaffected by scratches
Impregnated with color, eliminating the need for painting
Impervious to corrosive atmospheres
Oriux Signals feature ultraviolet-stabilized polycarbonate resin with a minimum thickness of 0.100 inches, and stainless steel exterior hardware. Couplers are made of standard steel-zinc, with an optional stainless steel variant available.
Polycarbonate signals are:
Material:
-
Ultraviolet-stabilized polycarbonate resin (having a minimum thickness of 0.100 inches), Stainless steel exterior hardware. Couplers are standard steel-zinc, but a stainless steel option is available.
Reflector:
- Snap-out assembly. Swing out frame. Lane control uses a standard reflector.
Lamp receptacle:
-
Heat-resistant molded phenolic, Rotatable through 360°. Pre-wired with 26” #18 AWG 105°C type TEW color-coded leads with Quick-disconnect terminals
Wire opening between sections:
-
Accommodates three 3/4”diameter cables
Terminal Block:
-
1-section 2-point
-
2-section 3-point
-
3-section 5-point
-
4-section 5-point
-
5-section 5-point, and 5 point
Signal alignment:
-
Integral 72-tooth serrated adjustable in 5 steps.
Weight:
-
8” (200mm) LED-Ready Section = 1.85 lb (0.84kg) 12” (300mm) LED-Ready Section = 3.15 lb (1.43kg)
Overall dimension:
- 8”(200mm) Section = 9.75”W x 10”Hx 6.16”D 12”(300mm) Section = 13.5”W x 13.44”H x 6.44”D
