NEMA Cabinet Power Supply
The Oriux Power Supply is a shelf-mounted unit that provides all regulated DC and AC voltages for Bus Interface Units (BIUs), load switches, and detectors in a TS-2 Type 1 cabinet assembly. This power supply is a requirement of the TS-2 standard for all Type 1 cabinets, and its primary function is to provide 12 VDC, 24 VDC, and 12 VAC outputs, as well as a line frequency reference within TS-2 cabinets.
The flexibility of this cabinet power supply allows for cabinet expansion, enhances reliability, and provides a superior power supply interface with Oriux or other manufacturers’ TS-2 cabinets.
The flexibility of this cabinet power supply allows for cabinet expansion, enhances reliability, and provides a superior power supply interface with Oriux or other manufacturers’ TS-2 cabinets.
Dimensions:
- 5.125″H × 6.7″W × 7.8″D (130mm × 170mm × 196mm)
- 5.125″H × 6.7″W × 7.8″D (130mm × 170mm × 196mm)
- 2.5 pounds (1.13 kg)
- Test points are provided for all output voltages
- Operating voltage system from 89 to 135 V AC (standard) or 180 to 265 V AC (220 variant)
- Temperature range from -40°F to +176°F (-40°C to +80°C)
- Compatible with NEMA TS-1 12 channel or NEMA TS-2 16 channel
- Operates from -40°F to 176°F (-40°C to 80°C)
- The power supply connector located on the front panel has a metallic shell which is connected to the chassis ground and mates with an MS3106-18-1S W cable connector or equivalent
- ELECTRICAL OUTPUTS: Four outputs listed below meet the electrical requirements as referenced in Section 5.3.5.3 of the NEMA TS-2-2016 Standard.
- 12 VDC rated at 2 Amps
- 24 VDC rated at 2 Amps
- 12 VAC rated at 250 Amps
- 60 Hz Timing Reference
- Pin Function
- A AC Neutral
- B Line Frequency Reference
- C AC Line
- D +12 VDC
- E +24 VDC
- F Reserved
- G Logic Ground
- H Earth Ground
- 12 VAC
- J Reserved
- Over current protection is provided on the front panel for the AC line power and all output voltages along with LED indicators to indicate the presence of voltage.
- Test Points Test points are provided for all output voltages Dimensions 5.125″H × 6.7″W × 7.8″D (130mm × 170mm × 196mm)
- -40°F to +176°F (-40°C to +80°C)
