625X Inductive Loop Detector
The Model 625X inductive loop detector from Oriux is designed for the parking and access control markets. With over 40 years in the traffic control industry, Oriux’s Model 625X detector represents the latest advancement in the company’s long line of reliable, full-featured detectors. Time-tested detection techniques, combined with state-of-the-art manufacturing, result in a compact unit that offers enhanced performance and compatibility with existing equipment.
625X Inductive Loop Detector
The Model 625X Inductive Loop Detector from Oriux is specifically designed for the parking and access control markets. Building on over 40 years of experience in the traffic control industry, the 625X represents the latest advancement in Oriux’s trusted line of reliable, full-featured detectors. The 625X combines time-tested detection techniques with state-of-the-art manufacturing. In addition, it delivers a compact yet powerful unit that offers enhanced performance and broad compatibility with existing equipment.Features and Functionality
The 625X is a single-channel inductive loop vehicle detector that provides essential vehicle presence information. This is needed by gate operators, ticket dispensers, card readers, as well as other access control devices. Despite its compact and lightweight design, the unit is engineered to perform reliably in demanding, high-volume installations and across a wide range of environmental conditions. Importantly, the reduction in size does not compromise the detector’s features or capabilities.Outputs and Controls
The detector offers two outputs: one continuously signals the presence of a vehicle over the loop, while the second output is switch-selectable. This second output can be configured to provide a pulse on vehicle entry, a pulse on vehicle exit, a secondary presence signal, or a loop fault indication. Easy-to-use front panel slide switches allow positive identification and adjustment of frequency and sensitivity settings, simplifying installation and setup.Output Options and Sensitivities
The detector offers flexible output configurations, including fail-safe or fail-secure outputs to suit different security requirements. It features four selectable sensitivity levels to optimize detection accuracy. The second relay output mode is configurable, allowing for various output functions such as pulse on entry, pulse on exit, a second presence output, or a loop fault output.Fault Indicators and Protection
Current and historical loop fault indicators help diagnose and maintain the system efficiently. The detector electronics and loop are galvanically separated, enhancing protection against electrical interference and ensuring reliable operation.Compatibility and Automatic Tuning
Designed to be compatible with existing equipment, the detector incorporates automatic tuning capabilities. It continuously and automatically readjusts frequency to counteract environmental influences, maintaining optimal performance under varying conditions.Advanced Features and Interface
Advanced settings can be accessed and modified via software using a USB interface, facilitating modern diagnostics and service tasks. The system also performs automatic adjustment immediately after power-up, ensuring quick and reliable startup. For convenience, basic settings can be easily adjusted using DIP switches on the unit.Area of Application
The Model 625X inductive loop detector is ideal for barrier controls, providing reliable vehicle detection to automate and manage access barriers efficiently. It is also widely used in door and gate controls, ensuring smooth and secure operation of entry and exit points in various facilities. Additionally, the detector is well-suited for parking and traffic engineering applications, where accurate vehicle presence detection is essential for traffic flow management and parking access systems.TECHNICAL DETAILS
- Dimensions: 3″H x 1.5″W x 3.5″L (w/o connector)
- Inductance: 18 to 1800 pH (Tuned automatically)
- Frequency Range: 10 to 97 kHz
- Temperature Range: -40°F to +176°F (-40°C to +80°C)
- Supply Power: 24 VAC or 120VAC available VA rating: 1.2VA
- Relay 2 Output: Relay2 Output Control Switch on back panel – SW3 SW2 – OFF + OFF= Pulse on Entering the loop, 125mS ±25mS – ON + OFF= Pulse on Leaving the loop, 125mS ±25 mS – OFF + ON = Second Presence Output ON + ON = Loop Fault Output
- Sensitivity: Six sensitivity settings are available using the 3-position front panel slide switch and switch 1 (SW1) on the back panel. MAX = 0.04% MAX = 0.02%, MED = 0.16% MED = 0.08%, MIN = 0.64% MIN = 0.32%
FEATURES
-
- Presence Time: 60 minute standard – Options: 8, 16 minutes, or permanent
- Frequency Setting: One of three operating frequency ranges can be selected with the front panel slide switch to elimi
nate cross-talk.
<li>
Detector Failure Condition: Two factory set options are available: Failsafe (Standard) when supply or loop fails. Presence output falls into the detect state, in addition Relay2 o
- utput falls in the quiescent state. Failsecure when supply or loop fails. Presence output falls in the quiescent state. Relay2 output falls in the quiescent state.
- Reset: The Reset button must be depressed for three seconds in order to establish an automatic retune. If depressed for less than three seconds, it will show loop faults as described below.
- Loop Fault Indicators: If the Oriux 625X sees a loop fault (open loop, shorted loop, or greater than a 25%inductance change), the Presence LED flashes at a 16Hz rate. If the fault condition corrects itself, the Presence LED and detector resume normal operation. This historic fault can be displayed by depressing the Reset button. The Presence LED flashes at a 16Hz rate to indicate a fault has occurred. When the Reset button is released, the detector resumes normal operation, within 3 seconds, the Presence LED and detector resume normal operation. This historic fault can be displayed by depressing the Reset button. The Presence LED flashes at 16Hz rate to indicate a fault has occurred. When the Reset button is released, the detector resumes normal operation within 3 seconds.
- Outputs: Presence and Relay2 are changeover relay contacts rated at 250VAC, 5A, 150W/600VA max. Optional: Optically isolated contact, 50VDC 50mA
- Lightning & Transients Protection: Zener diode protection from over-voltage induced on loop and feeder leads as well as flashover protection from loop to earth. Protection exceeds NEMA specifications
Explore the Oriux Options
Oriux covers a broad range of quality turnkey traffic control products and services. Oriux products have helped to make motorists around the world safer and their travels more pleasant and efficient. This expertise, experience, and breadth of product lines has made Oriux one of the most respected and recognized leaders in the traffic control marketplace. The Oriux product lines cover traffic cabinets, traffic controllers, monitors, power battery backup, traffic signals, advanced traffic management software, counters and classifiers and traffic detectors. For more information on any of our traffic systems equipment, explore our product section or contact us today.
