Toll Free + 1 (800) 245-7660

Products Traffic Controllers ATC-1000
ATC-1000

 

Advanced Traffic Controller ATC-1000

The ATC-1000 is the shelf mounted configuration of the ATC line of modularly-buit, standards-based controllers from Oriux

 Request information

Details

Designed for ease-of-use and easy adaptability, the ATC-1000 features Oriux’s latest ATC engine board and a full line of communication options.

Request information Download Datasheet Download Datasheet

 

This controller uses NTCIP communications natively and is entirely compatible with Oriux’s Spinnaker traffic management system.

Interchangeable I/O modules and D Modules allow the ATC-1000 to be utilized in the latest cabinets, but it will also work as a plug-in replacement in older, non- standards-based cabinets that currently house Multisonics, Traconex, LMD 40, LMD 9200 and HMC-1000 controllers, thus providing an upgrade path for older intersection control hardware.

 

ATC-1000

 
Dimensions Dimensions Communications Communications Interfacing Interfacing D Modules D Modules I/O Modules I/O Modules
Features

Features & Benefits

  • 14 3/4 ” Wide x 10 1/2 ” Deep x 10 1/4 ” Tall (375mm x 267mm x 261mm)
  • 9 to 11 pounds (4 to 5 kg) depending on which I/O modules, D modules, and modem are installed
  • Operating voltage range from 89 to 135VAC at 50/ 60Hz ± 3 Hz
  • Houston, TX, 77086V option is also available: 178 to 270VAC 50/60Hz± 3Hz
  • 16MB Flash memory, 64MB SDRAM and 1MB SRAM
  • Environment from -35°F to +165°F (-34 °C to +74°C) and relative humidity from 0 to 95%
  • Traffic application software is NTCIP software compliant, ensuring easy integration into any NTCIP or ITS traffic control system
  • Firmware update via USB port or via ATC Link Software
  • ATC-1000 operates with Linux v2.6.2.0 system
Communications

Communications

Connectivity is easily achieved using a variety of communications options:

  • 5 serial ports; RS 485 support on one port (jumper selectable)
  • Four 10/100 Base-T Ethernet ports
  • 3000E compatible modem slot
  • Optional 2070 compatible modem slot with full modem control support
  • Two High-speed USB ports
Interfacing

Computer Interfacing

Intersection configuration programming interfacing is easily performed in the field, using the provided laptop computer interface software (ATC Link). ATC Link can be connected directly via either an ethernet or a serial cable, or it can be used to store the configuration on a portable USB “flash drive”, which can then be downloaded to the device in the field in seconds. Or programming may be downloaded across a network via an NTCIP compliant central system, such as Spinnaker.

D Modules

Available D Modules

  • ATC D Module
  • 3000E Closed Loop D Module
  • LMD 40 D Module
  • Traconex D Module
  • Multisonics D Module
I/O Modules

Available I/O Modules

  • NEMA TS2 Type 1
  • NEMA TS2 Type 2
  • HMC-1000
  • LMD 40

You may also be interested in

ATC-2000---240

ATC-2000 Traffic Controller

The ATC-2000 is the rack-mounted version of Oriux's ATC controller. These controllers are designed to be modular and based on the widest range of traffic controller standards in the world.

See more See more
C5000-240

C5000 ATC

A new intersection traffic control field unit that incorporates control, safety monitoring and signal switching in a compact IT-style rack assembly. Marrying high density and high capability into a single space.

See more See more
ATC-CBD---240

ATC CBD Traffic Controller

Oriux designed and built the ATC CBD controller specifically to meet the exacting requirements of the New York City Department of Transportation.

We can help you

Expert advice

For more information about our products and services, please contact us.

Contact Us
Close

NEED HELP?

Contact us or request a quote, tell us about your project to help you better.