ADR-3000 Rack-Mounted Traffic Counter/Classifier

The ADR-3000 Plus is a high performance traffic counter and classifier designed for permanent installation. With the various options, the ADR-3000 Plus can count up to 64, or classify up to 32 lanes of traffic, including up to 24 WIM sensor inputs.

Request information


Several exclusive features have been incorporated into the ADR-3000 Plus.


The CPU electronics are fitted with a replaceable socket mounted fuse. Front panel mounted LED's indicate a successful start up of the microprocessor. LEDs also warn of system fault conditions and indicate the communications port activity and status. Additionally, a reset switch mounted on the front panel of the ADR-3000 Plus providing an easy method of restarting a unit during diagnostics, similar to cycling power.

Each unit can perform up to eight studies, plus generate per-vehicle records, with up to 4096 bins of data. This could include, for example, classification by speed, by lane, and volume. The type, configuration, and format of data to be collected can be custom programmed or selected from menu-driven choices. Available data types include per- vehicle records, per-lane data, binned vehicle classification by axle, speed, length, gap, or headway, or almost any combination of these classifications. Vehicles can also be classified according to either a Scheme "F" or a user-defined classification scheme.




  • Dimensions: 5.25"H x (10" or 19") W x 9.35"D (135mm x (255-480)mm x 240mm)
  • Weight: Less than 15 pounds (6.8 kg)
  • Temperature: -40°F to +165°F (-40°C to +74°C)
  • Display: 20 digits x 4 line liquid crystal display
  • Inputs: 24 sensor inputs of various types allowed, optionally up to 64
  • Counter rate: Handles 200 counts, per second, per input
  • Interval: 1, 2, 5, 6,10,15, 30 and 60 minutes 2,3, 6,12 and 24 hours, real time events - Four daily peak periods available
  • Microprocessor: Intel 80C186
  • Capacity: Approximately 3,280 days of volume data
  • Communications: Selectable RS-232 serial baud rates between 300 and 19,200 baud (115,200 baud-optional), via a UL and CSA approved female socket, with up to three ports available
  • Options:
    • Up to 8 sensor input modules or 64 individual inputs, depending on actual configuration, that can be a combination of loop, piezo, WIM or contact closure inputs
    • Front panel keypad and display
    • SD memory card socket
    • Solar power option
    • Compatible with the AxleLight® laser sensor
  • Quality Assurance Testing: Each unit is individually tested for correct operation during a computer controlled environmental chamber test cycle, based on the NEMA TS/2 standards. All input circuits have been designed and tested to the NEMA TS/2 standards for surge (lightning) protection.


  • Simple to set up and operate
  • 2 MB onboard memory (1 MB accessible)
  • Multilane operation
  • SD memory option for additional storage
  • Up to 64 inputs with a variety of sensor options
  • Scheme "F" or user-defined classification scheme
  • High-speed communications and telemetry
  • U.S. standard or metric units
  • Optional integrated control panel with LCD readout
  • Solar power options
  • Battery "sentinel"
  • Auto daylight savings timer

Optional Benefits

  • The ADR-3000 Plus is an instrument rack-based unit, expandable by function with individual plug-in modules. Available to fit standard EIA 19" or Type 170 enclosures, the Oriux ADR-3000 Plus may also be shelf or panel mounted.Electrical connections (external) are via rear mounted terminal strips for sensor inputs. Communications are supported via an RS232-C connector. Plug-in modules can consist of power supply, central processing unit, communications, control panel, memory, loop sensors, piezo sensors, weigh-in-motion sensors, contact closure inputs, analog to digital inputs or a combination of these for a particular application. Individual plugin modules are Eurocard in size with DIN standard connectors. Typical module width is 1 inch. Power options include 115 VAC, 6 or 12 VDC, solar power and operational battery-backup as necessary. An internally supported hardware real time clock maintains time and date, regardless of unit power, for up to ten years.


Traffic Operations Processing Software (TOPS), a Windows compatible software package, provides the user with the ability to process and format the data retrieved from the ADR-3000. Multiple users can access data from various locations to compile daily, weekly, or monthly reports.

The ADR-3000 is also compatible with VIPER, the next generation of Oriux data processing and polling software. VIPER works with most modern communication protocols, and is intended to automate data collection and processing. After collection, data from one or more files can be automatically processed into a variety of formats, including TMG, PRN, XML, and XLS, based on user definable criteria. Automatic data verification and synchronization are also supported.

The ADR-3000 is also compatible with Vision. Similar to the Viper software. Vision is intended to be a Technician software allowing for the remote programming, monitoring, and manual data retrieval of Study data.



Oriux warrants this product against manufacturing defects in materials and workmanship for two years from date of shipment from Oriux. Specific contracts and regional laws may vary or alter these terms.

You may also be interested in

We can help you

Expert advice

For more information about our products and services, please contact us.

Contact Us